Rides hard on a longboard

Longboard Flex explains, Flex table, Felx steps & your weight

The word "Flex"Is derived from the English expression" flexibility ", which means something like" elasticity "or" pliability ". It is about the flexibility of your longboard. In the Longboard of the Longboard Garage you will find longboards in different flex levels.

Decide the flex level how far the deck, the surface of the board, is pushed towards the ground when you are out on your longboard. Depending on your own body weight, riding style and the area of ‚Äč‚Äčapplication of the longboard, you have to buy your longboard The right flex for you choose. What degrees of hardness there are will now be described below.

What flex levels are there on a longboard?

Longboard manufacturers usually differentiate between different flex levels. In general, however, you just need to know that there are longboards with a soft flex and those with a hard flex. You should know which flex level is exactly the right one for you when buying a longboard because this has an enormous influence on the driving behavior. This article should help you to find the right flex for you. Since the flex levels specified by different manufacturers are not uniform, a few examples can only be shown here:

Longboard flex table

Unfortunately, there is still no standard or unit that has been defined so every longboard brand can assign its own flex levels. It is therefore important that you pay attention to the weight given by the manufacturer for the level.

Loaded boardsOlson HekmatiSick of winter
Flex 1 (hard, up to 120kg)medium (up to 75kg)Flex 1 (soft, up to 60kg)
Flex 2 (medium, up to 75-80kg)hard (up to 90kg)Flex 2 (hard, up to 90kg)
Flex 3 (soft, up to 65 kg)

Areas of application of different degrees of flex hardness

The more you strain your longboard, the more the flex is pushed through. To decide which flex is the best for you, so you not only have to pay attention to your weight, but also to that Use of your board and your driving style. If you are more of a cruising and carving type, then one is for you soft board.

You are usually traveling at rather low speeds, which is why the deck does not have to be so stiff, so a hard flex is not necessary.

For downhill and freeriding, on the other hand, you should rather go to one Longboard flex grip with a high degree of hardness, because you usually reach very high speeds and the deck of your longboard is exposed to high loads. A hard longboard flex represents a necessary resistance for this.

Consequence of a wrong degree of hardness

Choosing a longboard flex that is too hard or too soft can have unpleasant consequences for you as a rider. Is the Flex namely too soft, if the load is too high, the deck will push itself through too much and touches the ground. This not only slows down the longboard, but also damages it in the long term.

It can also cause it to Falls and serious injuries If the longboard flex is too hard, it significantly reduces the driving experience at low speeds. The point of a soft degree of hardness is that the deck bounces a little and you can perform a few interesting moves that would not be possible with a high degree of hardness.

Different types of flex

Even when building a longboard, everything revolves around the hardness of the Longboard flex, Different construction methods and materials ensure that the flex level differs from longboard to longboard. For example, some of the manufacturers attach an additional layer of wood to their models to make the flex more rigid. Some others use it for this Fiberglass or carbon fiber reinforcement.

Recommendations for beginners and advanced users: Why you should pay attention to the flex when buying

Through a soft longboard flex you get more control while driving. The deck always gives in slightly when moving, which means that you can better influence the direction of travel, for example. For this reason, longboards with a soft flex are more suitable for beginners. You will quickly find out, if you have a board with both a soft and a hard flex available, that the former is more forgiving. Be aware of this and decide on the right model based on your driving skills with the longboard.

A hard longboard flex is better suited for advanced riders and all those who prefer an aggressive driving style. So if you are someone who feels called to a carving, sliding or pumping style, then the best thing to do is to go for a hard flex. Flip tricks along with boneless airs and shovits are then much easier to perform.

Finally, a quick piece of advice: You shouldn't overestimate or underestimate your abilities. So if you are a beginner, choose your longboard accordingly. But do it yourself, should you already have advanced skills, with the purchase of a beginner's board not too easy.