What is the best cable drill

Drilling machine comparison 2021

  • A drill is an absolute must not only for the professional, but also for the do-it-yourselfer. A hole in the wall, in a beam or in metal - no problem with the right drill.
  • The most popular devices include impact drills. These not only rotate the drill, but also hit it against the wall.
  • A good home drill should be powerful and not overly heavy.

It is not missing in any household where enthusiastic do-it-yourselfers live: the drill. With a drill, or better still a hammer drill, you can easily drill holes in concrete walls, wood and metal. Simple renovation work and preparations for decoration and shelving on walls are easy with a drill.

When you want to put a picture on the wall, a clean hole is usually the first step. We give you a clear purchase advice in our drill comparison 2021. We also present the results of relevant drill tests and answer the most important questions about (impact) drillsto help you find the best drill for your needs.

1. Can impact drills convince with power and precision?

Whenever a hole is needed in a wall or beam, a drill is the tool of choice. You are sure to be just as familiar with Bosch drilling machines in tests as Metabo drilling machines and Dewalt drilling machines or the famous Hilti drilling machines.

In the past you had to use hand drills that were driven with pure muscle power, today you can use the somewhat more martial-looking Grab electrical device. The drill is driven by a motor that generates the right torque to penetrate masonry, wood or metal.

" More information

Depending on the material you want to drill into, you should choose a drill and hammer drill.

There are different types of drilling machines that are suitable for different jobs. Here we would like to introduce you to the most important ones.

1.1. Different types of drilling machines

If you read relevant drill press tests, you will quickly notice that there are drills of different categories. A wide variety of electric drills are represented, from small cordless drills to powerful hammer drills. Here you will find a brief overview of the most important types of drilling machines.

1.1.1. Manual drill winch

The drill winch is something like that Original drill. This drill works without an electric drive. It is held roughly in the middle with one hand while the other hand operates a crank that drives the drill.

Similar models that work according to this simple principle are still available today for special work. They can also be found in smaller versions in children's tool boxes.

1.1.2. Impact drill

The impact drill, or impact drill for short, is a practical all-rounder. This hand drill easily drills holes in stone, concrete and masonry.

The peculiarity of a hammer drill is its Impact device. This means that the drill is not only rotated, but also pushed against the material. This makes it much easier to drill a hole with a hammer drill - and also with a cordless hammer drill - than with a conventional (cordless) drill.

More exotic drills

In addition to the typical (impact) drills and hammer drills, there are also very special drills, such as knothole drills and core drills. Magnetic drills and bench drills.

The impact is triggered by a ratchet toothing on the drill spindle. The rotation of the motor pulls the machine and then hits it forcefully forward again on the drill. This also makes it easier to penetrate harder materials. If you don't need that much additional power, you can switch off the impact function of the drill.

1.1.3. Hammer drill

When things get a little more hearty, professionals use the hammer drill. This device is specially designed for working on stone and masonry and can also be used for chiselling. The main difference between the hammer drill and the percussion drill is its power.

While a hammer drill achieves around 50,000 blows per minute, only a hammer drill does about 4,000. But thiscomparatively few hits are executed with significantly more force.

A hammer drill is much more suitable for a clean hole where precision is the order of the day. But if a wall has to be perforated, the hammer drill is the first choice.

1.1.4. Rechargeable drill

In addition to the classic electric drills that work with a power cord, practical cordless hammer drills and cordless hammer drills have long been established. The batteries required for this are becoming more and more powerful and lighter, so that these drill / drivers are perfect for smaller jobs in the house and garden.

The advantages and disadvantages of cordless drills:

  • Cordless drills are much more flexible
  • many uses
  • Work independent of the power grid
  • Cordless drills are light and handy
  • limited period of use
  • possibly costs for a second battery
  • high quality models are quite expensive

2. What does Stiftung Warentest say about impact drills from Makita, Ryobi and Bosch?

Are you looking for the drill test winner? Stiftung Warentest carries out drilling machine tests at regular intervals. In the hammer drill test in 2015, Makita drills and models from Ryobi and Bosch were able to convince in the drill test.

In addition to the tests of drilling machines and drilling machine accessories, you will also find valuable tips on handling drilling machines on the website of Stiftung Warentest. The experts recommend a drill stand or drill holder for precise drilling.

" More information

Danger: If you regularly use the drill, it is better to opt for a slightly more expensive model. Impact drill tests show that models that are too cheap often fail quite quickly.

3. What should you consider when buying a hammer drill?

If you want to buy a drill, be it a cheap drill or a model from the drill test winner category, we would like to give you some buying tips here. In doing so, we are guided by criteria that are usually checked in impact drill tests.

" More information

3.1. The performance

The information about the performance of a hammer drill provides information about how much electricity the devices can consume. The output is given in watts (W). A power of around 500 watts should be sufficient for the work that occurs in your own house or garden. If you have to drill harder materials, however, it is advisable to use a professional device.

3.2. The drill chuck

There are two different variants of the drill chuck: the classic key-type drill chuck and the quick-release drill chuck. The drill chuck with toothed rim requires the use of a drill chuck key. This can be used to tighten the three jaws that hold the drill bit in place.

Drill accessories such as drill stands improve precision when working with mobile materials such as pieces or plates of wood and metal.

A keyless chuck is much easier to use - and it isno additional tools required. The drills have special drill shank systems for attaching the drill attachments. In many drilling machines, SDS Plus is used for tool-free changes.

3.3. The maximum drilling diameter

For normal use in the house, a drill with a very small drilling diameter is sufficient. For example, if you want to put a shelf on the wall or hang a picture, smaller drills are sufficient. However, if you are an ambitious do-it-yourselfer and want to do a lot of work around the house and garden yourself, a professional, larger-diameter machine might be the thing.

3.4. Different drill attachments for different materials

In order to achieve a good drilling result, you need the right drill for the material to be drilled. The following is an overview of the various drill attachments:

drillproperties
Wood drill
Center point; two sharp edges that are deeper on the outside; ideal for use in soft and hard wood, chipboard, plywood, MDF, etc.
Metal drill
conical tip; two sharp cutting edges; for use in iron, steel, copper, brass, etc.
Masonry drill
wedge-shaped tip made of hard metal; two sharp edges, blunt or ground; ideal for drilling in concrete, natural stone or tiles.
Universal drill
wedge-shaped tip; two sharp cutting edges; Mixture of stone, wood and metal drill bits; Ideally suited for drilling in constructions made of different materials.

4. What tips should you keep in mind when using drills?

In order to work correctly and safely, you should pay attention to a few points. Otherwise unpleasant injuries can occur, especially with devices such as drills.

" More information
  • Always work with protective glasses.
  • It is best to wear tight-fitting clothing.
  • Remove jewelry such as rings, necklaces or bracelets beforehand.
  • Tie long hair together before drilling.
  • Make sure you have a secure footing.
  • Never work with drills that have a damaged power cord.
  • Make sure that the cables are routed securely to avoid tripping hazards.
  • Always clamp the drill firmly in the drill chuck.
  • Always hold the drill with both hands.
  • Wait for the drill to stop before putting the drill down.

5. What are the major brands and manufacturers of drilling machines?

You are sure to be familiar with Hilti drills, Metabo drills and Makita tools, as these manufacturers appear in most impact drill tests. Here is a list of the most important manufacturers and brands of drilling machines:

" More information
  • Black & Decker
  • Bosch
  • DeWalt
  • DWT
  • Einhell
  • Fine
  • Hilti
  • Hitachi
  • Kawasaki
  • Kress
  • Makita
  • Metabo
  • Milwaukee
  • Varo
  • Westfalia

6. The most important questions and answers about the drill comparison

6.1. How many watts does a drill need?

How many watts a drill needs depends on its purpose. Machines with 500 watts are sufficient for normal renovation work. But it should be more if you have to do bigger work.

6.2. Who invented the drill?

A drill for woodwork requires less force than a model for metal.

The first electric hand drill was built by Wilhelm Emil Fein in 1895. It had an output of 50 watts. The device had a chest plate that the worker could use to use his body weight to bring the drill into the material.

6.3. How does a hammer drill work?

The motor and the gearbox of a drilling machine generate the rotary motion of the drill. A hammer drill has a toothed disc at the end of the drill spindle. Opposite this disk is another disk, which is firmly anchored in the housing of the hammer drill.

During the operation of the hammer drill, these two disks are now pressed against each other. The teeth of the flexible disk slide past those of the rigid disk again and again. They are pushed forward and jerked backwards. The harder you press on the machine, the stronger this effect will be. Many small blows are triggered when drilling.

6.4. How do I get the drill out of the drill?

There are two different types of chucks. With the classic drill chuck you need a special key with which they open the chuck can so as to remove the drill. However, drill chucks that exceed a kind of quick release feature. You can do this in just a few simple steps - and without additional tools- open and close.

Metabo SBEV 1000-2
Currently available for € 154.13
»Now to Amazon» Now to Ebay
Machine typeImpact drill
Power consumption1,010 watts
Can the device also be operated with a rechargeable battery?No, the drill is wired. The cable is four meters long.
Bosch GSB 20-2
Currently available from € 149.99
»Now to Amazon» Now to Ebay
Machine typeImpact drill
Power consumption850 watts
Is the drill suitable for renovating my house?Yes, because it was developed for drilling work in concrete, stone and masonry.
Bosch UniversalImpact 800
Customer favorite: the best-rated product in comparison on Amazon
Currently available for € 80.76
»Now to Amazon» Now to Ebay
Machine typeImpact drill
Power consumption800 watts
What is included in the scope of delivery of the UniversalImpact 800 from Bosch?In addition to the impact drill, an additional handle, a depth stop and a case are also supplied.

Which are the best drilling machines from our drilling machine test or comparison 2021?

Choose your personal drill test winner from the following list:

  • 1st place - very good (comparison winner): Metabo SBEV 1000-2 - from 154.13 euros
  • 2nd place - good: Bosch GSB 20-2 - from 149.99 euros
  • 3rd place - good: Makita HP1631KX3 - from 92.95 euros
  • 4th place - good: Bosch UniversalImpact 800 - from 80.76 euros
  • 5th place - satisfactory: Trotec PHDS 10-230V - from 27.95 euros
  • 6th place - satisfactory: Einhell TC-ID 650 E - from 26.51 euros
  • 7th place - satisfactory: Einhell TC-ID 550 E - from 29.95 euros
  • 8th place - satisfactory: Bosch EasyImpact 550 - from 48.00 euros
  • 9th place - satisfactory: Galax Pro 57322 - from 49.99 euros

All in all, the drill comparison contains 3 "good" drills and 5 "satisfactory" drills. Of the 9 models, one drill was rated "very good" and thus voted the winner in comparison: the Metabo SBEV 1000-2.

3 of the 9 products from the drilling machine comparison come from one manufacturer - Bosch can thus stand out from the competition due to the increased number of different "good" and "very good" drilling machines.

More information "

How many manufacturers are compared with each other in the drill comparison?

In the drill comparison, the editors compare 6 different manufacturers for you in order to offer you the best possible purchase advice. More precisely, the experts compared and rated models from Metabo, Bosch, Makita, Trotec, Einhell or Galax Pro. More information "

In what price range are the models from the drill comparison or test?

The most expensive drill from our drill comparison currently costs 154.13 euros, for the cheapest drill you only have to calculate 26.51 euros. More information under drill test. More information "

Which drill press has the most customer reviews?

With 3574 reviews, the Bosch EasyImpact 550 received the most customer reviews on Amazon. However, the best average reviews received the Bosch UniversalImpact 800. More information »

How many of the 6 different manufacturers were rated "VERY GOOD"?

Which drill models were compared or tested?

All in all, 9 different drill models were made, including:

  • Galax Pro 57322
  • Bosch EasyImpact 550
  • Einhell TC-ID 550 E
  • Einhell TC-ID 650 E
  • Trotec PHDS 10-230V
  • Bosch UniversalImpact 800
  • Makita HP1631KX3
  • Bosch GSB 20-2
  • Metabo SBEV 1000-2
More information "

What are customers looking for drills looking for?

The most popular alternative term for a drill is drill, followed by synonyms such as impact drills and impact drills. More information "