Can a civilian R AW join

Video DIY

Item pictureItem name-price

CHA / V Designs - CHA / V (PCB only)

The CHA / V (CHEAP, HACKY, A / V) is an open source, DIY, audiovisual, A / V, video synthesizer that was inexplicably built by civilians around the world as well as in international workshops and fancy art schools. If you...

Waiting list, on request
€ 10.00 details

LZX Industries - Castle 000 ADC (PCB & front panel)

The Analog to Digital Converter is used to convert an analog video input signal into a 3-bit stream. Bias and Gain (+/- N) are used to scale the input signal. + 12V Current Consumption: 21mA -12V Current ...

in stock
€ 20.00 details

LZX Industries - Castle 001 DAC (PCB & front panel)

The Digital to Analog Converter is a dual module to convert two 3-bit streams into two analog estimates. + 12V Current Consumption: 3mA -12V Current Consumption: 4mA Bill of material and schematic on the LZX ...

in stock
€ 20.00 details

LZX Industries - Castle 010 Clock VCO (PCB & front panel)

The Clock VCO is a voltage-controlled pulse wave oscillator with a linear controller. It is used, for example, as a clock source for modules such as the shift register or counter. There are horizontal as well as ...

in stock
€ 20.00 details

LZX Industries - Castle 011 Shift Register (PCB & Front Panel)

The shift register is a shift register with 4 memory positions. A bit is loaded from the DATA input into the clock input as a logical "high" and output from Q0. With the next "high" clock signal, the bit from Q0 ...

in stock
€ 20.00 details

LZX Industries - Castle 100 Multigate (PCB & front panel)

The Multi-Logic Gate offers 2 inputs, as well as XNOR, NOR, OR, NAND and AND outputs. Bill of material and schematic on the LZX product page Attention! The CastleSeries PCBs and Eurorack front panels are an offer for experienced Synth DIY ...

in stock
€ 20.00 details

LZX Industries - Castle 101 Quad Gate (PCB & Front Panel)

Quad Gate uses a single Quad Logic Chip and combines it in 4 different variants. A1 and B1 are combined and output at OUT1. A2 and B2 at OUT2. OUT3 is a combination of A1 and OUT2. OUT4 is a combination of OUT1 ...

in stock
€ 20.00 details

LZX Industries - Castle 110 Counter (PCB & Front Panel)

Counter is a 4-bit clock counter / divider. Each output (Q1 to Q3) outputs half the frequency of its predecessor. There is also an end of count output (RCO). When the counter reaches 16, it sends a pulse on the RCO. Together with...

in stock
€ 20.00 details

LZX Industries - Castle 111 D Flip Flops (PCB & Front Panel)

D flip flops consists of three type D flip flops that share a common clock and a common reset. Each flip flop can be viewed as a 1-bit sample & hold. The signal present on a D input is either ...

in stock
€ 20.00 details

Reverselandfill - Buffered Sync Busboard (DIY Kit)

This buffered sync bus board is intended for the connection of several LZX Cadet / DIY modules that use the 14-pin sync bus. You need a Cadet Sync Generator or Visual Cortex as a sync source. Features: There are ...

in stock
40.00 € details