Can we use polymers in engine parts

Price list
Woodworking

Our company offers a large number of processes in order to be able to treat your materials and aids in your production with a wide variety of surfaces. We find an ideal solution and develop individually tailored processes.

 

Paint stripping

The paint stripping enables the optimal recyclability of an object. Professional paint stripping gives workpieces and parts a clean surface and they can be immediately returned to the production process - a clear time advantage. Cost-intensive workpieces, production and painting aids are saved. That saves valuable resources! In addition, we can protect the workpieces against corrosion and rust on request.

Chemical paint stripping

A chemical process is ideal for temperature-sensitive workpieces such as painting and production equipment or incorrectly painted products. Sensitive parts such as thin steel sheets and hangers, springs, aluminum rims or engine parts are completely cleaned and the surfaces are not attacked. Precisely coordinated immersion baths are used for the workpiece and its surface to be removed. The composition of the chemical agents depending on the appropriate temperature and the duration of the immersion play a decisive role. After the immersion time, the coating residues are rinsed off with a high-pressure cleaner. The workpieces are then passivated. This process temporarily protects against corrosion.

before

later

Thermal paint stripping

The thermal process is ideal for heavily lacquered, temperature-insensitive workpieces and painting aids, e.g. gratings, robust steel parts or painting devices. Here we use the pyrolysis process. Polymers and organic compounds are broken down into smoldering gases and carbon. The subsequent oxidation phase completely removes any remaining carbon residues. Smoldering and smoke gases are burned. Finally, high-pressure water cleaning or sandblasting is carried out. As an aftertreatment, passivation can be carried out to protect against rust.

before

later


before

later

Rubber removal / stripping

In order to recover metal from rubber-metal compounds effectively and economically, we carry out a chemical degumming process. Particularly expensive production parts, old or defective rubber coatings such as engine parts and vibration dampers, are carefully separated and are ideally prepared for further processing.

before

later

Degreasing / decarburization

Grease residues can occur in the surface structure of the workpieces, which severely impair further processing and painting. Therefore, a degreasing process is required. The material properties and the contamination of the parts are decisive for the appropriate processes and chemicals. This is also used chemically in the immersion process. In the case of steel parts, passivation is then applied for protection, thereby temporarily preventing corrosion.

before

later

Rust removal

To remove rust, we use chemical derusting in an immersion bath or mechanically. The chemical process has a great advantage over the mechanical process and is accordingly well suited for areas that are mechanically difficult to access. The material is carefully processed. The passivation is then applied for protection. This process temporarily prevents the formation of new corrosion.

before

later

Pickling

Weld seams, annealing colors and extraneous rust can appear on the surfaces of stainless steel parts. This cannot be removed thermally or mechanically, as it would cause corrosion of the workpiece. That is why we carry out this process chemically in an immersion bath. By pickling, we achieve a clean surface and a better look.

Paint stripping and degreasing

A chemical process offers a paint stripping or cleaning option for temperature-sensitive workpieces, painting and production equipment or for incorrectly painted plastic products and enables optimal recycling and refinement.

The professional paint stripping and degreasing process protects the plastic parts, while at the same time having a clean surface and can be used again immediately in production.
We offer tailor-made solutions for almost all plastic cases and enable you to use your cost-intensive workpieces and aids in a functional manner again.
We do not conduct our procedures in a cataloged manner. In order to be able to develop an optimal problem solution, not only material properties of the parts, but also our know-how and experience as well as the wishes of our customers are taken into account.

One of the keys to our success is always the trusting cooperation with our customers.

Paint stripping

Almost all solid types of softwood can be chemically stripped in our modern caustic immersion baths. Due to the alkalinity of the bath, the oils and resins in the coating saponify and make them water-soluble. Paint residues can then be removed with a high-pressure cleaner. The leached piece is then neutralized in the acid bath. Then the object is rinsed again thoroughly with clear water.

All wood products can now be further treated or used without hesitation.
This method is often used for antique furniture. Thanks to our know-how and experience, valuable furniture is in the best of hands with us.

As additional services for antique furniture, we also offer deworming and restoration.

Deworming

A woodworm infestation is destroyed during the leaching process.
If a wooden object may not be vacuumed, we use a certified thermal special process. With this process, the surface is not attacked and remains unchanged.

Restore

Upon request, furniture can be professionally and carefully restored:

  • Missing parts or veneers can be reconstructed
  • Preservation, refreshment and thorough cleaning of surfaces
  • Shellac hand polish
  • Pickling and waxing

Our price list
to download